Ventilation set 1325 m³/h

Ventilation set 1325 m³/h

Proper grow tent ventilation is essential to healthy plant growth, and proper filtration is equally essential to clean the air and remove all odors. You should be replacing the air in your grow space at least every 5 minutes when the lights are on, and even quicker if your environment is struggling to combat heat. When it comes to indoor growing, its so important that you control your environment. A good ventilation system is necessary to make this happen.

THE SET INCLUDES:

• In-line Centrifugal Fan VK 315 - max airflow 1340 m³/h
• Filter CAN Lite 2000 - max airflow 2000 m³/h
• Alu-Flex Duct 315 mm - 3 m
• Power cable with Schuko plug - 1,5 m
• Metallic reducer 315 > 250 mm

FAN VK315

• Vents fan VK315. VK fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150, 200, 250 and 315 mm round air ducts. Models marked VK(Q) are supplied with quiet motors for low-noise applications. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc. The casing is made of high-quality durable ABS plastic. The fans are equipped with waterproof terminal boxes. Models marked VK(R) are supplied with the power cord and a plug. The impeller with backward curved blades is powered by a single-phase asynchronous AC motor with external rotor including the following features: A dynamic balanced impeller with backward curved blades balanced in two planes. Overheating protection with automatic restart. Maintenance-free ball-bearings used with motors and designed for at least 40.000 hours operation. Models marked VK(S) are supplied with high-powered motors.
• FEATURES: Air-flow - 1340 m³/h; Diameter - 315 mm; Voltage - 240 V

FILTER CAN 2000

• Carbon air filter for the ultimate air purification. The Original Can-Filter is a high quality, no-maintenance, carbon air filter with a tested and true 99.5 % odor removing capability and a suggested life-span of 12 - 18 months. Can Filters use only the best virgin activated (CKV-4) pellitised carbon - cleaning the air quickly and effectively. With 15 years experience specializing in activated carbon odor control. Can-Filters designs and builds only the highest quality Activated Carbon air filter, using only Virgin Activated Carbon specially formulated to meet your job criteria. Can-Filters provide one of Nature's best odor control materials - Activated carbon. The CKV-4 (carbon type) is specially developed for this purpose. Choice of Carbon type and activation process affects the Carbon's ability to perform well for a given application. Controlled grain size and a large surface area give full rated airflow and more than 99 % odor removal. Optimal Carbon bed thickness - More carbon means more absorption! Can-Filters packed bed design means no settling and no preferential channels for consistent performance and long life. Palletised Carbon for dust free even airflow throughout the entire filter, decreasing the amount of pressure on your fan for maximum air flow. Can-Filters contain more carbon than any other filter on the market with large carbon beds (wall of the filter containing the carbon) Flanges don't come fitted to the carbon filter. This allows a flexible approach; for example, 2 flanges are suitable for the Can-Lite 100: 100 mm or 125 mm. To determine the proper filter / fan size for your indoor garden you must first calculate the size of your room (length x width x height) and divide that number by how quickly you would like the air in the room to be exchanged (we suggest 1 - 3 minutes). This number is the recommended MINIMUM CFM that is neded to select the sutable Can-Lite filter. Whether for commercial, industrial, or residential use you can be sure that the proper carbon type, carbon weight, and bed width has been chosen to give full odor removal.
• FEATURES: Max air-flow - 2200 m³/h; Flange diameter - 250 mm

ALU TUBE 315 mm - 3 m

• Very flexible and durable aluminum tube for ventilation! If you are planning to build an indoor hydroponic grow room you will need to install a ventilation system to supply fresh air into the room and extract hot stale air from the room and the easiest way to do this is with some fans, fittings and of course ducting. Aluminium flexible ducting can be used to connect all your ventilation items together to create a sealed passage that will allow the air to travel through it in the direction of the flow of the fan, either supplying or extracting air from the room. When installing your aluminium ducting make sure to keep your runs taught and with as little bends as possible, as too many bends will greatly reduce your flow of air. Aluminium ducting can be connected with duct tape, foil tape or for the best solid fixing we recommend you use a jubilee clip.
• FEATURES: Lenght - 3 m; Diameter - 315 mm

POWER CABLE WITH SCHUKO PLUG

• Rubber cable with casted Schuko plug for power supply.
• FEATURES: Lenght - 1,5 m; Number of cores - 3 x 1 mm; Cable type - Schuko cable

METALLIC REDUCER 315 > 250 mm

• For branch connections of the air ducts used in residential, public and industrial ventilation systems. For connection of various air ducts and their integration into complex ventilation systems. For connection of two various air duct dia-meters. Made of special steel with polymeric coating or galvanized steel. The reducer is designed for connection of two air ducts with various diameters. Ventilation system components are fixed by clamps or any other fixing devices.
• FEATURES: Diameter 1 - 315 mm; Diameter 2 - 250 mm