Set Grow tent 1000 W

Set Grow tent 1000 W for indoor cultivation

To grow the best indoor plants, you need to know what equipment to buy to get the job done. This kit represents the best balance between price and quality for all the "indoor" enthusiasts.

Cables are not included!

THE SET INCLUDES:

• 1 x Ballast Fertraso 1000 W    or   Ballast Lumatek Dimmable 1000 W
• 1 x Reflector Hammertone with V Fold 470 x 470 mm    or    Cool Tube 155 x 490 mm
• 1 x Grow tent Pirate Box 150 x 150 x 200 cm 
• 1 x In-line centrifugal fan VK100
• 1 x Carbon Filter Prima Klima PK100
• 1 x Lighting Bulb Lumatek HPS DUAL 1000 W 
• 1 x Alu-Flex Duct 152 mm (3 m)
• 1 x Plastic reducer 150 > 125 mm

BALLAST FERTRASO 1000 W

• Professional Power unit for Indoor & Outdoor plant growing. Fertraso hybrid mechanical ballast with electronic ignition.

BALLAST LUMATEK 1000 W DIMMABLE

• Lumatek digital ballasts are the most advanced lighting solution for modern horticulture. Small, compact, and completely silent these E-Ballasts are able to deliver more lumens while using less electricity than standard magnetic ballasts. Unlike traditional ‘core and coil’ magnetic ballasts, Lumateks are microprocessor-controlled and able to evaluate and compensate for the actual state of lamp degradation and voltage fluctuations in power supply from your local grid.  This means that Lumateks are able to provide a precise controlled output voltage to the lamp ensuring optimum PAR levels are achieved. Electronic ballast for 1000 W HPS or MH lamp; Voltage: 220 - 240 V 50 / 60 Hz; Current: 4.70 A; Input power: 1030 W; Output power: 1000 W; Power factor: >0.99; Voltage range: 175 to 275 V; THD: <10%; Lamp CCF: <1.7; Operating frequency: high frequency; No audible noise, no flicker; Environment temperature: -25 to 40 °C (-13 to 104 °F); Ta 30 °C 86 °F; Tc 70 °C 158 °F; Humidity: capable of operating in relative humidity of 0 % to 90 %, non-condensing. To light a 600 W lamp, set control to 600 W. To light a 750 W lamp, set control to 750 W. 3 Year warranty!
• FEATURES: Manufacturer - Lumatek; Power - 1000 W; Dimmer - 600 W, 750 W, 1000 W, 1000 W SuperLumens

REFLECTOR HAMMERTONE WITH V FOLD 470 x 470 mm

• This Hammertone Reflector is designed for High Intensity Discharge. Suitable for Metal Halide and High Pressure Sodium lamps from 250 W, 400 W, 600 W to 1000 W.
• FEATURES: Dimensions - 47 x 47 cm; Lamp holder - E40

AIR COOLED REFLECTOR COOL TUBE 150 x 490 mm

• Get even more coverage from your Cooltube! The light from the Cooltube will cover a bigger area with this reflector. Due to the unique diffusion of the reflector it's possible to floodlight an area of approx. 1 x 1,60 m. The principle of a cooltube is the cooling of the lamp, which will be occured by put a glas pipe over the lamp. The hot exhaust air will be removed by a connected ventilator.

LIGHTING BULB LUMATEK HPS DUAL 1000 W

• Dual Spectrum 1000 W Lumatek lamp suitable for the vegetative and blooming phase. A full line of High-Par output lamps engineered for digital ballasts. Lumatek’s high-par output lamps are designed by the world’s leading HID lamp engineers. These lamps provide exceptional performance on both magnetic and electronic ballasts. 100 % European engineered and manufactured Lumatek’s high-par output lamps deliver an optimized spectrum and high level of Photosynthetic Active Radiation to promote healthy plant growth. These lamps have strengthened seals and a reinforced arc frame to ensure that they will provide long lasting performance with stable lumen output. When paired with a Lumatek ballast, you can increase your light output by 10 % with these finely tuned, specialized lamps.
• FEATURES: Manufacturer - Lumatek; Power - 1000 W; Base type - Mogul (E40); HID type - Sodium; Warranty - 1 year; Lumens - 130.000 lm

GROWBOX PIRATE BOX 150 x 150 x 200 mm

• The Grow tent Pirate Box PB150 is a metal frame grow tent equipped with an extra dense, water and moisture resistant black canvas, lined with high-quality 95 % reflective Mylar (hammered effect mylar fabric 210D). Equipped with a double flooring, it prevents minor outpourings. The package comprises filter-carrying bands. Supporting poles for lights and filters are 100 % metal. The grow tent has the following openings: Two on the front and on the back which enable us to access the plants; Two 200 mm inlets for the cooltube on the left and right upper part; Two openings on the lower part for passive ventilation; can be fully or only partially open; Four inlets for cables on the upper and lower back. Ventilation openings are of a 200 mm diameter and are found: On the lower left and right side; On the right and left back ceiling.
• FEATURES: Model - PB150; Size assembled - 150 x 150 x 200 cm; Size packed - 122 x 25 x 13 cm; Recommended lighting - 1 x 400 W lamp; Recommended ventilation - 460 m³/h set; Weight - 17 kg; Web page -  http://www.pirate-box.eu

IN-LINE FAN VK150

• Vents fan VK150 460 m³/h. VK fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150, 200, 250 and 315 mm round air ducts. Models marked VK(Q) are supplied with quiet motors for low-noise applications. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc. The casing is made of high-quality durable ABS plastic.The fans are equipped with waterproof terminal boxes. Models marked VK(R) are supplied with the power cord and a plug. The impeller with backward curved blades is powered by a single-phase asynchronous AC motor with external rotor including the following features: A dynamic balanced impeller with backward curved blades balanced in two planes; Overheating protection with automatic restart; Maintenance-free ball-bearings used with motors and designed for at least 40 000 hours operation; Models marked VK(S) are supplied with high-powered motors. The power cable is not included.
• FEATURES: Manufacturer - Vents; Model - VK 150; Air-flow - 460 m³/h; Diameter - 150 mm; Power - 64 W; Consumption -  80 - 0,08 kW; RPM - 2725 min-1; Noise (per m³) - 46 dBA; Max air temp. - from -25 to 55 °C; Voltage - 220-240 V; Current - 0.35 A; Frequency - 50 Hz; Protection degree - IPX4; Weight - 3,3 kg

CARBON FILTER PRIMA KLIMA PK125

• Active Carbon Filter PK125 480 m³/h. This filter destroys all the bad odors. It is made out of metal, which contains active carbon particles. Everything is wrapped up with the Fleece Filter which containts the bigger particles. Set it on the inner part of the "Grow Room".
• FEATURES: Manufacturer - Prima Klima; Model - PK125; Max Airflow - 480 m³/h; Optimal Airflow - 360 m³/h; Adapter diameter - 125 mm; Filter diameter - 180 mm; Lenght - 400 mm; Max temperature - 80 °C; Max humidity - 70 %; Weight - 3,6 kg

ALU FLEX DUCT 152 mm (3 m)

• Very flexible and durable aluminum tube for ventilation! If you are planning to build an indoor hydroponic grow room you will need to install a ventilation system to supply fresh air into the room and extract hot stale air from the room and the easiest way to do this is with some fans, fittings and of course ducting. Aluminium flexible ducting can be used to connect all your ventilation items together to create a sealed passage that will allow the air to travel through it in the direction of the flow of the fan, either supplying or extracting air from the room. When installing your aluminium ducting make sure to keep your runs taught and with as little bends as possible, as too many bends will greatly reduce your flow of air. Aluminium ducting can be connected with duct tape, foil tape or for the best solid fixing we recommend you use a jubilee clip.
• FEATURES: Material - Aluminium;  Lenght - 3 m; Diameter - 152 mm

PLASTIC REDUCER 150 > 125 mm

• For branch connections of the air ducts used in residential, public and industrial ventilation systems. For connection of various air ducts and their integration into complex ventilation systems. For connection of two various air duct diameters. The reducer is designed for connection of two air ducts with various diameters.Ventilation system components are fixed by clamps or any other fixing devices.
• FEATURES: Diameter 1 - 150 mm; Diameter 2 - 125 mm

WARNING: ELECTRICAL CABLES ARE NOT INCLUDED.